Case IH Farmall® 130A

Model Photo



  • Horsepower

    110 - 140 HP

  • Transmission

    Mechanical or Power Shuttle

  • Operator Environment

    Cab or Non-Cab

  • Compatible Loaders

    L103 / L104 Series Loaders


All the Horsepower You Need with No Regeneration

Equipped with a 4-cylinder 4.5 liter FPT engine, these new electronically-controlled and Tier 4 B/Final compliant engines provide operators with faster throttle response, improved cold weather starting, increased fuel efficiency, and quieter operation. Unlike some competitive utility tractors, Farmall 100A series tractors do not require a diesel particulate filter in order to avoid downtime and increase productivity with no regeneration.
Learn More About No Regeneration


Smooth Shifting Options to Match Your Needs

Choose from three transmission options to best suit your operation:
  • 8×8 clutchless power shuttle (standard)
  • 8×8 Synchro mechanical option with mechanical reverser
  • 16×8 power shuttle with hi-lo gear selection in every range

Operator Environment

Comforts to Make Long Days Seem Shorter

Hundreds of hours of research go into making long days seem shorter, controls seem more natural and chores seem less challenging in Case IH equipment. Farmall 100A series tractors continue the long-standing Farmall commitment, putting a high priority on operator comfort and productivity.
  • Comfort

    Climate-Controlled: Keeping the elements out while delivering the visibility you need to get the job done is what the Farmall 100A series cab platform is all about.

    Contoured Seat: Enjoy the contoured seat which comes standard with the Farmall 100A. Optional air suspension seat with 15 degree swivel also available.
  • Convenience

    Integrated Joystick: Our loader joystick comes standard from the factory and is integrated into the right-hand console for easier operation and greater productivity.

    Two Door Entry: Two doors provide easy access
  • Visibility

    Curved Window Frame: Our curved window frame increases loader visibility and provides outstanding overall visibility at a lower base investment.

    High Visibility Roof Panel: The optional high visibility roof panel allows the operator to see full-range loader operation while the sloped hood provides superior forward visibility — all for increased productivity.

Hydraulics and Hitches

Lift Heavy Loads with Confidence

Farmall 100A series tractors come equipped with a three-point hitch with a lift capacity of 7,200 pounds. Plus, the 22 GPM hydraulic flow capacity allows you to lift heavy loads with ease.

Connect implements quickly and easily with two standard-equipment, deluxe remotes with flow control and breakaway couplers. Easily add two more remotes as needed.

Maintenance and Uptime

Maximize Your Time Behind The Wheel With Minimal Time Under The Hood

Farmall 100A series tractors are engineered with rugged Case IH components proven to provide years of reliable service. Case IH quality replacement parts, maintenance programs and service expertise are designed to boost equipment efficiency and protect your investment – season after season.

Loaders and Attachments

Always Have the Right Tool for the Job

Tackle your toughest jobs with Case IH L104 series loaders, specifically designed to match Farmall 100A series tractors. They install and remove in minutes, and allow you to switch easily between attachments – no tools required.
See All Compatible Loaders
  • L103 Loader (For 2WD Models)


    • Lift Capacity Max Height @ pivot pins: 2,866 - 3,836 lbs (1,300 - 1,740 kg)
    • Boom Breakout Force @ pivot pins: 3,792 - 4,982 lbs (1,720 - 2,260 kg)
    • Raise time: 2.2 - 5.1 seconds

    Compatible With Farmall utility 100A series 2WD models

    L103 Loader
  • L104 Loader


    • Lift Capacity Max Height @ pivot pins: 3,395 - 4,079 lbs (1,540 - 1,850 kg)
    • Boom Breakout Force @ pivot pins: 4,409 - 5,247 lbs (2,000 - 2,380 kg)
    • Raise time: 5.6 - 6.4 seconds

    Compatible With Farmall 100A series tractors

    L104 Loader
  • Attachments & Implements

    Your Case IH dealer offers a full line of loader attachments and tractor implements to help you get the most productivity from your tractor. Implements are quick and easy to hook up and include front-, mid- and rear-mount options, ranging from material handling loader attachments to mowers, rotary tillers, snow blowers and more.

    Tractor Attachments & Implements >

    Download Implements Compatibility Chart >

    Loader Attachments >

Engine Performance

Advertised Engine Power, Rated, hp (kW)130 (97)
Maximum Engine Power, hp (kW)Same as advertised
Rated Engine Speed, rpm2200
Power Boost, hp (kW)No boost
Fuel Tank capacity, gal (L)56.8 (215)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L)7.9 (30)

PTO Performance

PTO Horsepower, Basic / Optional Transmission, hp (kW)105 (78)
PTO Speeds, rpm540 / 1000
PTO operational Type (Independent; Live; Continuous)Independent

Basic Engine

Engine MakeCase IH FPT
Engine Model4.5 L
Number of Cylinders4
Displacement, cu in (L)274 (4.5)
Engine Bore, in (mm)4.095 (104)
Engine Stroke, in (mm)5.20 (132)
Block Design, Replaceable LinersParent bore block
Aspiration, Turbocharged or Naturally AspiratedTurbo-intercooled

Fuel System

Fuel System DescriptionHigh Pressure Common Rail
Fuel System Control, Electronic or MechanicalElectronic
Fuel Injection to combustion chamber, Direct or IndirectDirect

Emission and Exhaust Treatment

Emission Level, US EPA TierTier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF)SCR with DEF
Exhaust Gas Recirculation (EGR)No
Cleanup Catalyst (CUC)CUC standard
Diesel Oxidation Catalyst (DOC)DOC standard
Diesel Particulate Filter (DPF)No
Exhaust Pipe, Vertical stack or HorizontalVertical stack

Cooling System

Fan Drive TypeBelt

Electrical System

System Rating, Volts14
Alternator Rating, Amps120 std.; 200 opt.

Basic Transmission Configuration

Manufacturer's Description8Fx8R Power Shuttle
Transmission TypeHydraulic Power Shuttle
Number of Forward / Reverse Speeds8F / 8R
Maximum Speed Forward, mph (kph)18.6 or 25 (30 or 40)
Creeper Range AvailableOptional for all transmissions
Shuttle (Forward-Reverse) AvailableStandard, w/ left hand shuttle lever

Optional Transmission 1

Manufacturer's Description16Fx8R Power Shuttle
Transmission TypeHydraulic Power Shuttle w/ Hi-Lo
Number of Forward / Reverse Speeds16F / 8R

Optional Transmission 2

Manufacturer's Description8Fx8R Mechanical Shuttle
Transmission Type2 ranges, 4 speeds/range
Number of Forward / Reverse Speeds8F / 8R

Wheel or Track Configuration

Drive Wheels or Tracks; 2WD,4WD, 2WD / 4WD, 2 Tracks or 4 Tracks2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type SteerFront Steer

Rear Axle Assembly

Final Drive Location and DescriptionInboard planetary
Axle Output End, Flange or BarFlange standard; bar optional
Axle Bar Diameter, in (mm)3.071 (78)

Front Axle

Suspended Front Axle AvailableNo


Service Brake TypeWet disc

Hydraulic System

Hydraulic System TypeOpen center system, CCLS remotes
Main Hydraulic Pump TypeFixed displacement pump
Implement Pump Flow, gpm (Lpm)22 (83)
Optional Pump Flow, gpm (Lpm)No option
Number of Standard Remote Valves2 std; 3 or 4 opt

3-Point Hitch Features

3-Point Hitch CategoryCategory 2
Optional Hitch CategoryNo option
Draft Sensing or Lift ControlDraft sensing, top link
Draft Link Ends TelescopicYes

3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg)7,200 (3266)
Optional Lift Capacity 24 Inches behind pin, lb (kg)5,400 (2449)
Standard Lift Capacity at lift pin, lb (kg)np
Optional Lift Capacity at lift pin, lb (kg)np


Drawbar DescriptionSwinging, extendable, Category 2

Wheelbase / Trackbase

Wheelbase, 2WD, in (mm)95.7 (2432)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm)103.9 (2640)


Length, 2WD, incl. Hitch/Drawbar, in (mm)np
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm)184.6 (4690)

Vertical Dimensions

Height to Top of Cab, in (mm) 110 (2800)
Height to Top of ROPS raised, in (mm)117.3 (2980)

Width w/Tires or Tracks

Overall Width, with standard wheels or tracks, in (mm)74.5 (1893) at fenders; 98 (2490) bar axle ends

Weight (w/Tires or Tracks)

Weight, 2WD w/ROPS, lb (kg)9,660?(4382) preliminary
Weight, MFD/4WD w/ROPS, lb (kg)10,225 (4638) preliminary
Weight, 2WD w/Cab, lb (kg)10,040 (4554) preliminary
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg)10,605 (4810) preliminary
Weight, Total allowable, w/maximum ballast, lb (kg)12,700 (5761) preliminary

Tire / Track Size

Front Tire Size, 2WD10.00-16, 8 ply, F2
Front Tire Size orTrack Width, MFD/4WD or Track13.6 R28, R1W
Rear Tire Size or Track Width18.4 R34, R1W; Duals available w/bar axle

Sales Literature

Literature NumberTA-1546-18
Literature DateOctober, 2018

Secondary Literature Source

Secondary Literature NumberTA-1406-14
Secondary Literature DateOctober, 2014

Other Documentation

Document Number--
Document Date--

Status and Entry Dates

Manufacturing Status, Current or ArchiveCurrent
First Entry Date10/25/14
Revision Date10/29/18
  • Case IH black min
  • greatplains min
  • rhinoag min
  • woods black min
  • LandPride min
  • unverferth black min
  • Hardee min
  • KMC black min
  • Monosem logo min
  • brand Kubota