Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
The FHX300 has a wide, 25.5 in (647.7 mm) throat opening to swallow even the heaviest crops. The feedrolls move material smoothly and evenly into the cutterhead. Rugged, 21 in (533 mm)-diameter cutterhead
12 hardened-alloy knives chop evenly and efficiently
Knives span the full width of the cutterhead
Provides uniform length of cut, converting crop into high-quality feed
Powerful Blower Moves Quickly
A powerful 1,000-rpm blower moves crops quickly to fill wagons and trucks fast. Works efficiently regardless of whether you’re working in wet, heavy hay or an easy-to-blow crop like corn.
Remote Control the Spout
Electronic remote controls allow you to rotate the spout 90 degrees. The spout is easily repositioned to fill towed forage wagons or trucks to the left. From your tractor seat, you control:
FHX300 feedroll direction either forward or reverse
Basic pick up functions
The standard hydraulic tongue swing from road to field position
Cut Lengths from 3/16 in to 1 5/16 in
The FHX300 allows for precise cut-length adjustment . Control length of cut by:
Changing feedroll speed
Adding or removing knives
Using one of five optional recutter screens
Achieve a cut length from 3/16 in to 7/16 in (5 mm to 11.1 mm) with all 12 knives. With only four knives selected, achieve a cut length as long as 1 5/16 in (33.3 mm).
Stop Feedrolls Before Metal Can Damage the Cutterhead
How it works: Detector stops feedrolls within a fraction of a second — before metal can damage the cutterhead.
The sensor and electromagnet in the front lower feedroll emits a constant magnetic field between the two stainless-steel lower feedrolls.
A light and horn alert you when metal is detected, and a signal is sent to the solenoid to stop the feedrolls.
Power is shut off to an electric clutch on the reversing gearbox that shifts to neutral and stops the power to the feedroll drive.
The feedroll control switch allows you to back the material out of the feedrolls.
After metal is removed, the detector resets automatically.
Maximize Feed Quality
The optional crop processor maximizes feed quality in corn silage, saving time and cost by chopping and processing in one operation. By removing the material baffle and the processor drive belt, you can chop haylage. Crop coming from the cutterhead is propelled between two 8 in (203-mm)-diameter fluted rolls. The top roll turns 15 percent faster than the bottom roll , providing the scuffing action necessary to crack kernels and break cob pieces . This results in:
More effective fiber in the ration
Feed that’s easier for livestock to digest
Heavy-duty Gauge Wheels and a Floating Auger
Built compact for easy maneuvering in hilly terrain and smaller fields:
Ground-hugging HDX20P windrow pickups gather the entire crop.
Heavy-duty gauge wheels handle rough ground
Wheels help the pickup rise over swells and into dips without gouging
Open end pulls in wide windblown windrows
Measuring 92 in. (2.3 m) tine-to-tine, the HDX20P has the capacity to handle large windrows
Closely spaced pickup tines flex to gather the entire windrow
Floating auger handles heavy crop conditions
Retractable finger feed auger feeds crop smoothly
Auger reverses with feedrolls to easily clear plugs in case of overload
The HDX3R Grabs Every Stalk
Points float over ground contours
Skid shoes are adjustable to eliminate bulldozing
Gathers cornstalks planted on 28 to 32 in (711 to 813 mm) row spacing
Gathering chains reach forward to grasp cornstalks and feed smoothly into feedrolls
Cutting discs shear corn close to the ground
Discs are spring loaded
Allows discs to move out of the way when an obstacle is encountered
Right- and left-hand power dividers ensure heavy crop flows into feedrolls
Windrow Pickups: 28 and 32 in (1.9 and 2.3 ft) Cutterhead: 12-Knife PTO Required: 180 hp (134.2 kw)