Case IH SB541C

Model Photo

 

Features

Pickup

Plenty of Sturdy Tines and an Adjustable Pickup Gauge Wheel

The pickup on the Case IH small square baler series is designed for high productivity. 

Tines

  • Sturdy, closely spaced, curved finger tines gently lift the crop while keeping leaves intact
  • Rugged tine bars run on sealed ball bearings

Standard pickup gauge wheels adjust to five positions

  • Guides the pickup through field contours
  • Pick up every bit of the windrow

Raise Pickup for Transport

  • Manual latch or optional hydraulic pickup lift

Feeding System

A Uniform, Well-Shaped Bale

Huge 283-sq in. (1,826-sq cm.) feed opening allows SB balers to gather large, uneven windrows. A uniform, well-shaped bale is produced by the dependable Case IH feeding system.

  • High-throughput rotary feeding system delivers high capacity in any crop
  • Heavy-duty, double-rotating tines overlap to feed crop smoothly and continuously
  • Adjustable double-packer fork folds hay into the bale chamber
  • No-plug feeding system effortlessly moves crop from the pickup area to the bale chamber with minimum shatter loss
     

Density Control

Easy Bale Density Control

All SB Series balers allow for easy bale density control by adjusting the tension applied to the bale chamber. For manual density control, tension springs are an economical choice.

  • Provides "set-it-and-forget-it" convenience
  • Ensures consistent bale weight and density

Ties & Twists

Handle Challenging Baling Conditions

Case IH small bales hold up to handling from the rack to the elevator and from the barn to the bunk. 

Dependable Gear-Driven Twine Knotters

  • Hard-surface material at all wear points
  • Bill hooks are chrome plated for extra durability and reduced maintenance
  • SB541 is also available with a gear-driven wire twister

Large-Capacity Twine Storage Increases Field Time Between Refills

  • SB531 — load six balls of twine
  • SB541 and SB541C — load eight balls of twine
  • SB541 wire-tie version features four-coil wire storage
     

Twine Options

Setting the Standard for Twine Quality

Plastic twine from Case IH is made in the USA and continues to be the hay and forage industry’s standard for quality. Options available include:

  • PLASTIC BALING TWINE provides tight bales that are consistent in size. The twine is uniform diameter and strength to perform in harsh applications with guaranteed knot and tensile strengths.
  • BALEKEEPER PLASTIC TWINE is designed with the value-conscious farmer or operator in mind and is available in the most popular knot/tensile strengths and lengths.
  • SISAL TWINE is 100% biodegradable, mildew resistant twine that helps keep your fields healthy. Sisal twine features uniform thickness consistent tensile/knot strength.

Bale Thrower

Simple Design and Easy Operation

Fill your wagon with bales as you make them with the optional Case IH BTX11 bale thrower, available with the SB531 and SB541.

  • Handles bales up to 38 in. (965 mm) long and up to 70 lb. (32 kg)
  • A smooth, reliable hydraulic drive throws the bales
  • Easily operated from your tractor seat
  • Move the Case IH bale thrower to the left or right to fill the corners of the wagon
  • Adjust the belt speed to load the front or the back of the wagon
  • The simple design of the BTX11 allows for easy installation, adjustment and service
     
Bale Cross Section - Height in14
Bale Cross Section - Width in18
Min Bale Length in12
Max Bale Length in52
Standard Density Control Adj hydraulic density
Bale Thrower Compatible No
Pickup
Pickup Position Offset to right side
Sweep Width On Flare in80
Sweep Width Inside in75
Width Between Outside Tines in67.5
Tine Spacing in2.63
Number Of Tines 156
Number Of Tine Bars 6
Windguard Description 13 rods
Standard Pickup Lift Hydraulic
Pickup Protection V-belt slippage & lost motion reel drive
Feeder
Feeder Description Rotary feeder w/ packer
Feeder Opening in²283
Plunger
Plunger Speed (Strokes/min) 93
Plunger Stroke in30
Tying Mechanism
Tying Mechanism Type HD Knotter
Twine Ball Capacity 8
Main Drive
Flywheel Diameter in22
Flywheel Weight lb248
PTO Driveline Std three-joint, Category 6
PTO Speed rpm540
Main Drive Protection Shearbolt, overrunning & slip clutches
Standard Tire, Left 14L x 16.1, 6PR
Standard Tire, Right 11L x 14, 6PR
Weight With Twine Tie lb3940
Min PTO Power Required hp75
  • Case IH black min
  • greatplains min
  • rhinoag min
  • woods black min
  • LandPride min
  • unverferth black min
  • Hardee min
  • KMC black min
  • Monosem logo min
  • brand Kubota