Kubota SCL1000
Features
POWER & PERFORMANCE
- 24.8 HP Turbo-charged Kubota engine provides quiet operation, high altitude performance and requires no DPF.
- Hydraulic pump directly connected to the engine reduces maintenance.
- Vertical lift loader arms reach higher and further than the competition with a hinge pin height of 84.7" and a reach of 26" (at 45° dump angle).
- 1000 lbs. ROC combined with 15 gpm auxiliary hydraulic flow make for a powerful and productive compact utility loader.
- Works in zero clearance yards with low impact wide track design (4.0 psi) minimizing damage to grass or landscaping.
- 4.9 mph Best in class travel speed
COMFORT & CONVENIENCE
- Cushioned loader boom cylinders and adjustable platform suspension increase operator comfort for maximum productivity.
- 4.3" Color LCD monitor
- Keyless start with passcode protection
- 12 Volt charging port
OPERATOR CONTROLS
- The patent pending T-drive handle provides intuitive and ergonomic steering.
- Hydraulic pilot-operated loader and drive control valves offer precise and responsive control of the machine.
- Right hand joystick controls loader arm and bucket movement.
- Auxiliary hydraulics are easily operated without removing your hand from the loader joystick.
- Continuous flow in either direction is as simple as pushing a button.
DURABILITY
- Auxiliary hydraulic lines are routed inside the loader arm for optimal protection. Case drain is standard. Auxiliary hydraulic couplers are pressure release type.
- Attachment hose guide is standard.
- Welded track frame has angled top for debris shedding and the dual flange front idler provides better stability and weight distribution.
SERVICE
- Easy to access centralized filters and everyday maintenance items.
- Dash indicator light alerts when the air filter needs cleaned, and service information is readily available at the touch of a button.
- Maintenance time is reduced with permanently sealed and lubricated track rollers, and the grease type track tension system.
COUPLER
- Heavy-duty cast CII Coupler and protective cover for bucket cylinder fittings.
- CII coupler is standard.
- Optional welded 2-lever style coupler.
- Solid state controller minimizes fuses reducing electrical components, while improving reliability.
- The hood is made out of impact resistant material for greater protection.
SAFETY
- Engine RPM has to be at idle to unlock the hydraulics for machine operation.
- Walk behind mode for loading onto a trailer allows operation of the travel and loader joysticks only.
- When operator leaves the platform, the parking brake is automatically engaged.
- Front LED work light has 30 second courtesy timer to stay on after powering off.
Specifications
Horsepower (gross) | Horsepower (gross)24.8 | |
---|---|---|
Displacement, cu in (cm3) | Displacement, cu in (cm3)54.8 (898) | |
Engine Type | Engine TypeWater cooled 4 cycle diesel engine with 3 cylinder, turbo, EPA Tier 4 | |
Rated Speed, rpm | Rated Speed, rpm2800 | |
Low Idling Speed, rpm | Low Idling Speed, rpm1250 | |
Overall Length, in (m) | Overall Length, in (m) Transport (w/Std Bucket Parallel to Ground): 107.7 (2.74) (w/o Bucket): 84.9 (2.16): | |
Overall Height, in (m) | Overall Height, in (m)55.7 (1.41) | |
Overall Width w/Std Bucket, in (cm) | Overall Width w/Std Bucket, in (cm)36 (91.44) | |
Rated Operating Capacity (ROC), lb (kg) | Rated Operating Capacity (ROC), lb (kg)1,000 (453 kg) @ 35% | |
Tipping Load, lbs (kg) | Tipping Load, lbs (kg)2857 (1296) | |
Auxiliary Hydraulic Pressure, psi (mPa) (kgf cm2) | Auxiliary Hydraulic Pressure, psi (mPa) (kgf cm2)2800 psi (19.3) (196.8) |