Land Pride's AFM3011 is just right for estate mowing. The weight has been reduced from our commercial series to fit compact tractors in the 30 to 55 HP range. With a cutting width of 11' and cutting height of 1" to 5.5", the AFM3011 will rival a zero-turn in volume and quality. The decks are 4' wide, 10 gauge steel with a 6" overlap; coupled with a single beam hitch and equal angle driveline this unit can make tight turns without streaking. The decks feature rear discharge and angled deflector to eliminate the need for chains and to provide even distribution without clumping. - Less
Land Pride's AFM3011 is just right for estate mowing. The weight has been reduced from our commercial series to fit compact tractors in the 30 to 55 HP range. With a cutting width of 11' and cutting height of 1" to 5.5", the AFM3011 will rival a zero-turn in volume and quality. The decks are 4' wide, 10 gauge steel wit... + Read More
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Counter blade rotation on center and right-hand deck
Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn't get covered up or bogged down by cut grass. Prevents robbing tractor horsepower.
5'-7" (1.7 m) Transport width
Meets most city/county codes for transport width.
6" (15 cm) Deck overlap
Eliminates skipping when going into a tight turn.
10'-11" (3.5 m) Cutting width three 48" decks
Sized right for golf courses, cities, schools. Small decks give excellent flexibility.
Sleek frame design, including single beam hitch and compact deck overlap
Design allows operator to make tighter turns without leaving windrows and skips. AFM virtually becomes a zero turn mower. (Over-sized tires may not allow this.)
Automatic transport wing locks
When wings are raised in the full transport position, the wings lock in place. No need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
Optional Hydraulic Transport Locks
Transport locks can be released easily from the tractor seat while operating the; same tractor control lever that folds and unfolds the mower decks. Eliminates pulling a rope to release transport locks.
18" Transport tires with tapered roller bearings
Transport tires offer smooth roading and less grass compaction. Allows grass to stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles
Allows a spindle to be replaced by simply removing one bolt.
Back wheels on side decks in line with transportation tires
Allows tighter turns without skips.
Zero turn radius
Sleek frame design allows operator to make tighter turns without leaving windrows or skips. The AFM virtually becomes a Zero Turn Mower.
Rigid rear side deck tires.
Rigid wheel yokes holds hills and slopes better.
10" Solid rubber deck tires
Solid rubber won't go flat.
Square tube gauge wheel arms
Gives the mower gauge wheel arms a great deal of "hidden" strength.
Low pivot points on deck
The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck.
Deflectors built into mower decks
Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit does not meet ANSI specifications.
Even dispersal, discharged items are aimed downward. No rear chains are needed, which tend to clump damp grass.
Rounded front deck edges with no protruding skid shoe
Helps protect trees and other obstacles.
1/4" (6 mm) Front edge & all-welded seams
Provides extra durability.
Cat. 3 equal angle main driveline
Equal angle main driveline allows for tighter turns without harming U-joints in driveline.
Shear bolt protection
Guards against premature gearbox failure. Protects mower deck spindles.
Cat. 3 wing drivelines
Designed to withstand start-up torques.
No paint to scratch off, lighter weight, no rattling or rust.
Heavy gearbox mounts on center and side mower decks
Handles start-up torque better.
Gearbox Horsepower Rating
30-55 hp (22-41 kw)
Three year limited gearbox warranty. Demonstrates our confidence in the gearbox's quality and lasting performance.
Sealed for life blade spindle bearings
No blade spindles to grease means no guards to remove to grease blade spindles.
Middle spindle sits towards the back of the mower deck.
Uses less horsepower and allows material to escape the mower deck easier. The discharge of material is more even. Design eliminates windrowing.
Spring loaded idlers
Applies constant tension to belt to run efficiently.
High blade tip speed
Lifts grass up for a clean cut and efficient discharge of material. Tip speed rates are as high or higher than the competition.
Choice of Blade Medium lift standard Others available thru parts dept.
Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbs the soil very little, allowing blades to wear longer. Medium Lift - Medium suction for lifting grass. Requires less horsepower than high lift. High Lift - Greatest suction for lifting grass before cutting. Can take higher horsepower in tall dense grass. Not recommended in sandy soils. Mulching - Perfect for leaf mulching.
Cutting width in (m)
Overall width in (m)
Transport height in (m)
Transport width in (m)
Overall length in (m)
136 (3.45) in transport position
Weight lbs (kg)
Hitch Weight lbs (kg)
Tractor horsepower hp (kW)
Minimum 30-55 (22-41)
Pull type with safety tow chain
Tongue support lb (kg)
2,000 (907) Capacity Screw Jack
Gearbox support in (mm)
1/4 (6) Steel plate
540 rpm (1)-splitter gearbox and (3)-wing gearboxes
Gear lube 80-90W EP
Gearbox oil capacity pints (L)
Three - wings: 1.7 (.8) Splitter: 1.32 (.62)
Main driveline (1)
Category lll equal angle
Deck drivelines (3)
Category III with shearbolt protection
Cutting height in (mm)
1 to 5 1/2 in 1/2 (25 to 140 in 13 increments)
Deck size and quantity in (m)
Three each at 48 (1.22)
Deck overlap in (cm)
Deck thickness ga (mm)
Blade drive belt
1 per deck - B-section V belt
Drive belt tensioning
Spring loaded idler
Sealed ball bearings
Blade size and type 3 each per deck in (mm)
Standard medium lift blades - 1/4 x 2 1/2 x 16 7/8 (6 x 64 x 430) Optional blades - Low lift, high lift, & mulching
Blade overlap in (mm)
Blade tip speed fpm (mpm)
Ten each, 10" x 3.25", solid rubber with caged roller bearing
Deck wheel spindles in (cm)
1" (25.4) with nylon bushings
Two each, 18" x 9.5", sealant with tapered roller bearings
Automatic transport locks with pull rope release
23° left to right 22° front to back
Rear deck flex
13° front to back
One set required
Deck lift cylinders
Gauge wheel arms
Square tubing with 1/4" (6 mm) wall
Zero turning radius
@ 2 mph = 2.68 acres per hour (3.2 km/h = 1.1 hectares per hour) @ 4 mph = 5.37 acres per hour (6.4 km/h = 2.2 hectares per hour) @ 6 mph = 8.10 acres per hour (9.7 km/h = 3.3 hectares per hour)