Kubota by Land Pride: The EA20 Excavator Augers are ideal for dirt or building contractors, fence contractors, and in rental fleets. Easily reach hard to access areas with an excavator and bore holes for fences, footings, and more. Only available through Kubota Dealers.
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Fits a wide range of Kubota excavators with a mechanical quick attach coupler mounted on the end of the arm. Easy hook-up and unhook capabilities. Excavator boom & arm can be used to apply additional down force.
Supports the auger while traveling. Keeps the auger from swing erratically. Allows the auger to be carried low without hitting the ground or other protrusions.
Excavator Augers are able to reach over fences or other obstructions.
Gearbox is completely sealed with all moving parts running in oil for constant lubrication.
Patent pending vertical indicator
Indicates when auger is vertical, makes it easier to drill straight vertical holes.
2" Hex output shaft
High torque resistance.
Choice of three drive motors
Three flow ranges: 6-15 gpm, 10-20 gpm, and 15-30 gpm Covers a wide range of Kubota excavators.
Hydraulic hoses routed out top of motor/gearbox housing
Allows motor/gearbox housing to follow auger into hole and dig a deeper hole without damaging hoses.
Large selection of augers
Variety of Dirt, Tree, and Rock Auger sizes and styles to suit many applications
Replaceable hardened steel pilot points on dirt augers
Hardened points will last longer than non-hardened. Points are replaceable. Fish tail tips and steel point make it easier to start a hole.
Replaceable carbide pilot points & teeth on rock augers
Points are designed for cutting through rock and are replaceable.
Large selection of bolt-on rock heads
Pengo Dirt Augers can be converted to Rock Augers with this accessory.
Two auger extensions
Available in 2 lengths (24" & 48") Increases the depth of hole the auger can dig by 24" or 48".
Specifications & Capacities
6-30 gpm (22.7-113.6 lpm) @ 1500 to 3500 psi (10.3 to 24.1 MPa)
Base weight without Options
46 lbs (20.9 kg)
Auger flighting thickness
5/16" (8 mm)
2 1/2" (6.4 cm) ID
Forged, individually replaceable 40 Degree angle installed on flat side 50 Degree angle installed on angled side