Kubota by Land Pride: The SC25 Skid Cutters are ideal for clearing grass, weeds, and brush up to 2" diameter. They can be set to cut depths as low as 1.5" and come in either 60" (SC2560) or 72" (SC2572) widths with three different volume drive motors to maximize performance on your SSV or SVL models. They are ideal for tightly restricted areas under fences, in and around boxed in corner sections of corrals and out buildings, vineyard, nursery rows, wooded lots, and approaches to ditches and waterways.Only available through Kubota Dealers. - Less
Various flow req.
Kubota by Land Pride: The SC25 Skid Cutters are ideal for clearing grass, weeds, and brush up to 2" diameter. They can be set to cut depths as low as 1.5" and come in either 60" (SC2560) or 72" (SC2572) widths with three different volume drive motors to maximize performance on your SSV or SVL model... + Read More
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Low volume motor @ 11-17 gpm Medium volume motor @ 18-23 gpm High volume motor @ 24-30 gpm
Customer can choose one of three optional motors for his SC2560 cutter or one of three optional motors (low, medium and high volume) for his SC2572 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer
1/4" Side panels for overall reinforcement
Protects sides from debris being thrown against them from the blades.
Front and rear chain shields
Single chain on the front and double chain on the rear. Reduces flying debris.
Replaceable skid shoes (optional)
Protect side plate structure. Shoes are replaceable for convenience.
Splined blade bar
Allows for tight positive fit of stump jumper and blade bar to motor output shaft.
3/16" Round stump jumper
Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1/2" x 4" Heat-treated free swinging blades
Heat-treated blades offer longer life. Free-swinging blades protect from obstructions
2" Diameter cutting capacity
Can aid in clearing brush.
SC2560 High blade tip speed
Low volume motor = 17,939 fpm at 17 gpm.
Medium volume motor = 19,142 fpm at 23 gpm.
High volume motor = 19,390 fpm at 30 gpm.
SC2572 High blade tip speed
Medium volume motor = 19,487 fpm at 23 gpm.
High volume motor = 19,685 fpm at 30 gpm.
Offset hitch (8 1/2" to the right)
Allows the operator to cut close to obstacles on the right side.
Optional front gauge wheel
Provides easy operation and handling over uneven terrain, laminated tire can’t go flat.
Floating hitch mounting plate
Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator
Motor pressure gauge
Allows the operator to ensure that the motor is operating at proper psi.
Lift limit safety chain
Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18".
Cutter weight without skid shoes, gauge wheel, & protective door
Gauge wheel weight (Optional)
Skid shoe weight (Optional)
Standard skid shoes = 10 lbs.
Heavy-duty skid shoes = 21 lbs
Protective door weight (Optional)
Universal floating-hitch mounting plate. Hitch plate can be mounted centered on the deck or mounted to offset the deck to the right 8 1/2".
1 1/2" to 18" infinitely variable.
Gearbox oil capacity & lubrication
Does not apply
Spindle hub oil
EP 80-90 wt. gearlube
Low volume drive motor
17-20 gpm flow
Medium volume drive motor
21-25 gpm flow
High volume drive motor
26-30 gpm flow
1500 to 3500 psi.
Side skirt construction
Deck wear protection (Optional)
Optional four corner mounted skid shoes.
Skid shoes construction (Optional)
Standard-duty skid shoes = 1/4" x 2"
steel Heavy-duty skid shoes = 3/8" x 3" steel
Heavy duty round pan stump jumper.
1/2" x 4" updraft.
1 1/8"-12 x 3 7/16" with key.
11-20 gpm motor blade tip speed
21-25 gpm motor blade tip speed
26-30 gpm motor blade tip speed
14,100 fpm at 20 gpm
14,000 fpm at 25 gpm
13,000 fpm at 30 gpm
Front deck protection
Single row chain guard.
Rear deck protection
Double row chain guard.
Deck lift height protection
Safe chain limiter.
Cutting height gauging (Optional)
Pivoting and adjustable front mounted gauge wheel with laminated tire.