Kubota by Land Pride: The TE35 Series Trip Edge Blade is a construction-grade blade for contractors and landscapers alike. These units can be used for snow removal, landscaping, and other dirt working tasks. The TE35 is available in a 96" (TE3596) or 108" (TE3510) model. Both models feature a robust 7 gauge moldboard with support bracing for rugged dependability. Only available through Kubota Dealers. - Less
Kubota by Land Pride: The TE35 Series Trip Edge Blade is a construction-grade blade for contractors and landscapers alike. These units can be used for snow removal, landscaping, and other dirt working tasks. The TE35 is available in a 96" (TE3596) or 108" (TE3510) model. Both models feature a robust 7 gauge moldboard w... + Read More
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Allows cutting edge to rotate on its mounted trunnion keeping the cutting edge in uniform contact with the ground.
Pivot float lock
Keeps cutting edge level when in transport for better operator visibility and safer handling.
Cast grip steps
Provides for safer and easier mounting and dismounting by the operator with the Trip Edge Blade attached.
30" (76.2 cm) overall moldboard height
Provides ability to perform in deep snow conditions.
Replaceable cutting edge
Offered in steel or heavy-duty poly construction to match ground & surface operating conditions.
Abrasion Resistant Skid shoes
Offered as standard equipment. Abrasion resistant to last longer. Establish lower limits of cutting edge operation to prevent surface gouging or cutting too deep.
Optional cable filled orange markers
Provides operator with improved awareness and visibility of outermost edges of the moldboard and cutting edge to prevent unwanted contact with ground obstacles. Filled with a steel cable for longer life
Optional top-mounted rubber deflector
Helps prevent snow from over-topping the moldboard in deeper snow conditions.
Skid steer horsepower
Minimum 60 hp (45 kW) Maximum 100 hp (75 kW)
Skid steer type quick attach, meets ISO 24410
Hitch mounting steps
7 Ga. (4.6 mm) Steel
30" (76.2 cm)
Maximum cutting width
96" (2.44 m)
Cutting width @ 30o angle
83" (2.11 m)
Maximum pivot angle
30o left & 30o right
Hydraulic angle cylinders
Two double acting cylinders, 2 1/2" bore x 8" stroke
Maximum hydraulic pressure rating Hydraulic cylinders Hydraulic hoses and fittings
3500 psi (24.1 mPa) 4000 psi (27.6 mPa)
Maximum float angle
Floats on the skid shoes 5o clockwise & 5o counterclockwise