Land Pride's DB2660 (DBM2660) Ditch Bank Rotary Cutter boasts a number of features that will make mowing ditch banks, pond dams, or other hard to reach inclines fast, easy, and efficient. Built for either 540 or 1000 RPM tractors, the DB2660 features a 58" cutting width, 1" cutting diameter, and 32" cutting reach. The 1/2" by 4" blades rotate clockwise at 15,000 fpm, directing debris away from the tractor. Minimum cutting height is dictated by the tractor's 3-pt height. - Less
Land Pride's DB2660 (DBM2660) Ditch Bank Rotary Cutter boasts a number of features that will make mowing ditch banks, pond dams, or other hard to reach inclines fast, easy, and efficient. Built for either 540 or 1000 RPM tractors, the DB2660 features a 58" cutting width, 1" cutting diameter, and 32" cutting reach. The ... + Read More
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
SMV mounting socket receives most SMV signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer. SMV sign is offered as an accessory when the tractor’s SMV sign and mounting blade does not fit the cutter’s standard SMV mounting socket.
Specifications & Capacities
75 Minimum hp.
Minimum tractor lift capacity
Minimum tractor weight
7,000 lbs without added weights
1,792 lbs (With front & rear chain guards, side gauge wheel, Ditch Bank mounted speed increaser, & Case weight hanger. Without fluid in reservoir)
Overall width (fully retracted with optional weight bracket)
10' - 3 3/4"
Minimum cutting height (Deck level)
2" Minimum Maximum is dependent upon 3-point lift height.
Horizontal cutting extension
Maximum horizontal reach from center of tractor
85o up, 95o down
Blade tip speed
Number of blades & size
2, 1/2" x 4"
1 1/2" With keyway, harden flat washer, and locknut
3/16" X 21" Round, dish-shaped
Side skirt thickness
Speed Increaser fluid capacity
NOTE: Refer to metal tag on speed increaser for vendor name (BIMA or Comer). Tractor mount, refer to Figure 6-4 on page 42. BIMA = 1 1/2 pints Comer = 2 pints Ditch Bank mount, refer to Figure 6-5 on page 42. BIMA = 2 pints Comer = 1 pint
Speed increaser fluid
80-90W EP Gearlube
Mobilfluid 424 For alternate fluids, search on the web for "Mobilfluid 424" or go to www.mobil.com
Reservoir capacity and filter
35 Gallons / conventional 10 micron filter
Method to check oil capacity
Hydraulic fluid flow rae
15 gpm (approx.)
Hydraulic relief valve
ASAE category 4
2 1/2" Wide x 1/4" thick & replaceable
Gauge wheel (optional)
4 x 8 Laminated tire with greasable caged roller bearings.
Gauge wheel adjustment
SMV Sign (Accessory)
SMV decal on galvanized steel back sign and plated or galvanized blade mount.