Land Pride's RC5615 (RCM5615) features a smooth top for easy cleaning and a smooth bottom for better airflow and less caked-on debris. Contractors and roadside maintenance crews will enjoy the sliding center shield, driveline end-cap grease zerks, and easy-off wing shields that all combine to make maintenance fast and efficient -- less time maintaining means more time mowing. Standard features like the heavy-duty dishpan, replaceable side skirts and skid shoes, and LED transport lights add value. - Less
Land Pride's RC5615 (RCM5615) features a smooth top for easy cleaning and a smooth bottom for better airflow and less caked-on debris. Contractors and roadside maintenance crews will enjoy the sliding center shield, driveline end-cap grease zerks, and easy-off wing shields that all combine to make maintenance fast and ... + Read More
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13..
Saves customer set-up time and money.
7 Year gearbox warranty*
Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Rugged heavy built gearboxes
Capable of handling heavy cutting applications.
Gearbox Seal Protection
Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft
Large output shaft handles shock loads better.
2 Piece shield on wing gearboxes
Driveline grease zerks are easier to access.
Reduces drawbar wear by keeping hitch level while going through ditches.
Low hitch weight on tractor tongue
Ideal for smaller horsepower tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch
Allows for a tighter turning radius.
Adjustable park jack angle
Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger
Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline: Cat. 6 CV or Cat. 5 conventional
Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
Drivelines with slip-clutches: RC56 Series: Cat. 4 standard RC66 Series: Cat. 5 standard
Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Grease zerks on end caps of driveline cross journals
Intermediate and wing driveline cross journals are easier to grease. All drivelines have access holes for greasing the U-joints and inner profiles.
High blade tip speed
Allows clean cutting of material and even distribution.
6" Blade overlap
Eliminates skipping during turns.
High cutting capacity
Can cut brushy areas with saplings up to 4" with 56 Series and 4 1/2" with 66 Series.
Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
Reinforced leading edge
Front of deck can withstand heavy brush and saplings.
12" Deck height
Handles heavy cutting, which reduces balling-up of cut material under the deck.
10 Gauge smooth deck top
Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom
Heavy deck design holds up to harsh conditions. No bottom obstructions.
Replaceable 1/4" side skirt
Reduces debris piercing possibilities. Can be replaced if damaged.
3/16" Stump jumper backed with a 1" thick mounting bar
Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.
Beveled skid shoes on wings
Reduces gouging the ground when turning.
LED Signal lights
LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
Hinged wing sections
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
Greasable wing folding hinges
Provides for a long hinge life and allows wings to fold up and down with less stress.
1" Solid hinge rods
Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
Wing transport lock pins
Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Collapsible leveling rods
Prevents damage and failure to leveling rods.
Enclosed front to rear dual leveling rods
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims
Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned trailing arms
Provides independent suspension, cushions loads on drawbar.
Replaceable wheel spindles
Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
Laminated tires: Eliminates flats. Airplane tires without foam filling: Give better cushion while transporting. Airplane tires with foam filling: Give better cushion while transporting and can’t go flat.
LP Performance hitch option
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
Bar-tite hitch option
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Roadway light kit option
Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.
Deck rings (optional)
1/2" x 3" full welded deck ring keeps blades from damaging the deck.
50 to 250 hp (37.3 to 186.4 kw)
250 hp (186.4 kw) Splitter 210 hp (156.6 kw) Center & Wing