Land Pride RCF2084

Double tap to zoom

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
Cat. 4 drive-line with 2-plate slip-clutch Slip-clutch drive-line offers convenience for continual work.
Dual position clevis type 3-Point floating top link Permits deck to follow the terrain for an even cut.
Lower clevis type 3-Point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck & side skirt construction Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
11 15/16" Deck Height Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
Full length skid shoes Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" x 27" Oval stump jumper Standard Oval stump jumper slides over stumps, rocks and debris.
High blade tip speed Ensures clean cut.
15" Laminated tail-wheel Laminated material is long lasting in rough conditions. Can't go flat.
1 1/4" Heavy-duty spindle on tail-wheel Tail-wheels take a beating, spindle gives the strength to protect tail-wheel assembly.
Optional Front Guarding Protect against flying debris. Customer can choose to include single chain or rubber guarding.
Optional Rear Guarding Protect against flying debris. Rear Metal Band is standard. Customer can choose to include single chain guarding.
Drive-line Holder Keeps drive-line up out of dirt. Easier hook up of drive-line.

Specifications

Specifications & Capacities  
Machine Weight: Single Tail-wheel
Dual Tail-wheel
1,047 lbs. with Front Rubber Guard and Rear Metal Band.
1,155 lbs. with Front Rubber Guard and Rear Metal Band.
Hitch Category l & II with floating top linkage, Quick Hitch ready
Cutting Width 84"
Overall Width 89"
Overall Length: Single Tail-wheel
Dual Tail-wheel
133 1/4"
126"
Deck Height (Bottom of Deck to Bottom of Skid Shoe) 11 15/16"
Cutting Height 1 1/2" to 12"
Cutting Capacity 2" Diameter
Recommended tractor hp 45-90 hp
Power take-off speed 540 rpm
Gearbox Ratio 1:1.44
Gearbox Construction Speed-up beveled gears, cast iron housing,
1 3/8"-6 spline input shaft and 2" output shaft
Gearbox Oil Capacity & Type 7 Pints of EP 80-90W oil
Deck Construction All welded deck
Deck Material Thickness 10 Gauge (.134")
Side Skirt Material Thickness 10 Gauge (.134")
Skid Shoes: Standard
Accessory
Full length weld-on skid shoes
1/4" x 2 1/2" x 18 7/16" Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes)
Stump Jumper 3/16" x 27" Oval Pan with 1" thick blade holder bar
Blades (2) 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift
Blade Bolts Keyed with harden flat washers & lock nuts.
Blade Tip Speed 17,113 FPM
Drive-line ASAE Category 4
Drive-line Protection 2 Plate slip clutch
Tail-wheel Mount Welded A-arm and caster fork with 360 degree swivel
Tail-wheel 4" x 8" x 15" Laminated tire with cast iron hub
Front Guard: Optional
Optional
Rubber Belting
Single Chain Guard
Rear Guard: Standard
Optional
Metal Band
Single Chain Guard
  • Case IH black min
  • greatplains min
  • rhinoag min
  • woods black min
  • LandPride min
  • unverferth black min
  • Hardee min
  • KMC black min
  • Monosem logo min