Kubota by Land Pride: The SC25 Skid Cutters are ideal for clearing grass, weeds, and brush up to 2" diameter. They can be set to cut depths as low as 1.5" and come in either 60" (SC2560) or 72" (SC2572) widths with three different volume drive motors to maximize performance on your SSV or SVL models. They are ideal for tightly restricted areas under fences, in and around boxed in corner sections of corrals and out buildings, vineyard, nursery rows, wooded lots, and approaches to ditches and waterways.Only available through Kubota Dealers. - Less
Kubota by Land Pride: The SC25 Skid Cutters are ideal for clearing grass, weeds, and brush up to 2" diameter. They can be set to cut depths as low as 1.5" and come in either 60" (SC2560) or 72" (SC2572) widths with three different volume drive motors to maximize performance on your SSV or SVL models. They are ideal for... + Read More
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Low Volume Motor @ 11-16 gpm Medium Volume Motor @ 17-21 gpm High Volume Motor @ 22-27 gpm
Customer can chose one of three optional motors for his SC2660 cutter or one of two optional motors (medium and high volume) for his SC2672 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer.
Two Year Gearbox & Motor Warranty
Shows Land Pride's confidence in the gearbox and motor.
Smooth Top 14 GA Deck with 10 GA. Bottom Deck
No pockets to collect rain and dirt. Easy to clean. Superior double deck construction
1/4" Side Panels for Overall Reinforcement
Protects sides from debris being thrown against them from the blades.
Allows material to be discharged away from operator.
Front and Rear Chain Shields
Single chain on the front and double chain on the rear. Reduces flying debris.
(Optional) Replaceable Skid Shoes
Protect side plate structure. Shoes are replaceable for convenience.
Splined Blade Bar
Allows for tight positive fit of stump jumper and blade bar to motor output shaft.
3/16" Round Stump Jumper
Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1/2" x 4" Heat-treated Free Swinging Blades
Heat-treated blades offer longer life. Free swinging blades protect from obstructions.
2" Diameter Cutting Capacity
Can aid in clearing brush.
SC2660 High Blade Tip Speed
Low volume motor = 18,540 fpm at 16 gpm. Medium volume motor = 18,850 fpm at 21 gpm. High volume motor = 19,000 fpm at 27 gpm.
SC2672 High Blade Tip Speed
Medium volume motor = 17,200 fpm at 21 gpm. High volume motor = 18,550 fpm at 27 gpm.
Offset Hitch (8 1/2" to the right)
Allows the operator to cut close to obstacles on the right side.
Optional Front Gauge Wheel
Provides easy operation and handling over uneven terrain, laminated tire can't go flat.
Floating Hitch Mounting Plate
Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator.
Optional Operator Protection Door
Provides additional operator protection from flying objects.
Lift Limit Safety Chain
Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18".
Various flow req.
60", 72" Widths
Smooth top design
Quick & easy attachment
Front mounted pivoting gauge wheel w/Laminated tire available